Micro Switch Connector Automatic Transfer

Micro Switch Connector Automatic Transfer is offered by China manufacturers WEIPENG®. Our competitive pricing and popularity in the European and American markets make us an ideal long-term partner for your Household appliances ultra-small micro switch needs in China.

Model:HK-14-1-16AP-729

Send Inquiry

Product Description

WEIPENG® is a leading Micro Switch Connector Automatic Transfermanufacturers, suppliers and exporter.

Micro Switch Connector Automatic Transfer Introduction

The micro switch is based on the pin type, which can be derived from button short stroke type, button large stroke type, button extra large stroke type, roller button type, reed roller type, lever roller type, short boom type, long boom type and so on. Microswitches are used in electronic equipment and other equipment for automatic control and safety protection devices that require frequent circuit changes. Micro switch is divided into large, medium, small, according to different needs can be waterproof type (used in liquid environment) and ordinary type, the switch connects two lines, for electrical appliances, machines and other power control to provide on-off control, widely used

TongDa Micro Switch Connector Automatic Transfer Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5（2)A/10A/16(3)A/21（8）A 250VAC
2	Contact Resistance		≤30mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	1000V/0.5mA/60S
		Between terminals and the metal frame	3000V/0.5mA/60S
5	Electrical Life		≥50000 cycles
6	Mechanical Life		≥1000000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency : 10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature :235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering : 300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、TUV、CE、KC、CQC
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa