Mini Micro Switch for Home Appliance

Mini Micro Switch for Home Appliance Spdt has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:DK4-BD-020

Send Inquiry

Product Description

WEIPENG® is a leading Mini Micro Switch for Home Appliance manufacturers, suppliers and exporter.

Tongda Wire Electric Mini Micro Switch for Home Appliance Introduction

The micro switch can meet different operation requirements by changing the length and shape of the rod.The electrical life of the micro switch is usually more than 100,000 times.The micro switch has the characteristics of explosion-proof, anti-corrosion, anti-oil, etc., and is suitable for special environments.

Tongda Wire Electric Mini Micro Switch for Home Appliance Application

Micro switches can be used for position detection and alarm triggering in environmental monitoring equipment, such as temperature sensors, humidity sensors, etc. Micro switches can be used for position detection and load transfer in electronic scales and weight sensors, such as kitchen scales, cargo scales, etc. Micro switches can be used for automatic control and position detection in industrial production, such as assembly lines, assembly lines, etc.

Tongda Wire Electric Mini Micro Switch for Home Appliance Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		10(1.5)A 125/250VAC 10A 36VDC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥3000000 cycles
7	Operating Temperature		-25~105℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency : 10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature :235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、TUV、ENEC
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa