Micro Switch for Home Appliance Low Force

Micro Switch for Home Appliance Low Force is offered by China manufacturers WEIPENG®. Our competitive pricing and popularity in the European and American markets make us an ideal long-term partner for your Household appliances ultra-small micro switch needs in China.

Model:HK-04G-LT-129

Send Inquiry

Product Description

WEIPENG® is a leading China Micro Switch for Home Appliance Low Force manufacturers, suppliers and exporter.

Tongda Micro Switch for Home Appliance Low Force Introduction

HK-04G Micro Switch for Home Appliance with ENEC TUV UL is a small contact interval and fast moving mechanism, with the specified stroke and the specified force of the switch action contact mechanism, covered by the shell, its external drive rod of a switch, because the switch contact spacing is relatively small, so the name of micro switch, also called sensitive switch.

Application:Apply in A computer mouse, car mouse, automobile electronic products, communications equipment, test instrument, gas water heater, gas burner, small home appliance, microwave oven, electric rice cooker, floating ball supporting equipment, medical equipment, building automation, electric tools, ect.

Tongda Micro Switch for Home Appliance Low Force Parameter (Specification)

1. The external mechanical force acts on the action reed through the transmission element. When the action reed is displaced to the critical point, instantaneous action is generated, so that the moving contact at the end of the action reed is quickly connected or disconnected from the stationary contact.
2. When the force on the transmission element is removed, the action reed generates reverse action force. When the reverse travel of the transmission element reaches the action critical point of the reed, the reverse action is completed instantaneously. Household appliances ultra-small micro switch contact spacing is small, short travel, according to the power, quick break. The speed of the moving contact has nothing to do with the speed of the transmission element.
3, about the change of the action characteristics, even in the action characteristic specification value of ±20[%] changes should not cause failure.
4. In the case of hand welding, please use the electric temperature with temperature adjustment 320℃max to complete the operation within 3 seconds, and pay attention to the operation of the terminal part do not apply force.

5, in the use of small current, voltage, it is recommended to use the low-power circuit type (Au cladding contacts).

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa