Micro Switch With Bend Lever

Micro Switch With Bend Lever is offered by China manufacturers WEIPENG®. Our competitive pricing and popularity in the European and American markets make us an ideal long-term partner for your Household appliances ultra-small micro switch needs in China.

Model:HK-04G-LD-131

Send Inquiry

Product Description

WEIPENG® is a leading China Micro Switch With Bend Lever manufacturers, suppliers and exporter.

Tongda Micro Switch With Bend Lever Introduction

The inside of the microswitch is usually composed of contacts, springs, fixing brackets, joysticks, etc. During operation, when the lever is subjected to external force, the contact and spring will move relative to each other, so as to realize the action of the switch. The material and shape of the contact, the stiffness coefficient of the spring, and the structure of the bracket will all affect the performance of the microswitch.

Tongda Micro Switch With Bend Lever Parameter (Specification)

1. The external mechanical force acts on the action reed through the transmission element. When the action reed is displaced to the critical point, instantaneous action is generated, so that the moving contact at the end of the action reed is quickly connected or disconnected from the stationary contact.
2. When the force on the transmission element is removed, the action reed generates reverse action force. When the reverse travel of the transmission element reaches the action critical point of the reed, the reverse action is completed instantaneously. Household appliances ultra-small micro switch contact spacing is small, short travel, according to the power, quick break. The speed of the moving contact has nothing to do with the speed of the transmission element.
3, about the change of the action characteristics, even in the action characteristic specification value of ±20[%] changes should not cause failure.

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5(2)A 125V/250VAC 10(3)125V/250VAC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥100000 cycles
7	Operating Temperature		-25~125℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature : 235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、VDE、ENEC、CE
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure : 86~106KPa