Switch Various Type Micro Switch

Switch Various Type Micro Switch has a small contact interval and a quick action mechanism, and the contact mechanism for switching action with the specified stroke and force is covered by the shell, and there is a transmission on the outside, and the shape is small

Model:DK4-DT-017

Send Inquiry

Product Description

WEIPENG® is a leading Switch Various Type Micro Switch manufacturers, suppliers and exporter.

Tongda Switch Various Type Micro Switch Introduction

Micro switches can realize more complex functions by connecting other sensors.Micros witches can be activated mechanically or electronically.Micro switches usually have fast response and stable switching performance.Micro switches can be flexibly installed and used in narrow spaces.

Tongda Switch Various Type Micro Switch Application

Micro switches can be used for flow control and water level detection in water supply equipment, such as water pumps, water level switches, etc. Micro switches can be used for switch control and position detection in electric vehicles, such as electric vehicle brake switches, charging sockets, etc. Micro switches can be used for button control and position detection in electronic gaming equipment, such as gamepads, joysticks, etc.

Tongda Switch Various Type Micro Switch Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		10(1.5)A 125/250VAC 10A 36VDC
2	Contact Resistance		≤50mΩ Initial value
3	Insulation Resistance		≥100MΩ (500VDC)
4	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
5	Electrical Life		≥10000 cycles
6	Mechanical Life		≥3000000 cycles
7	Operating Temperature		-25~105℃
8	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
9	Vibration Proof		Vibration Frequency : 10~55HZ; Amplitude :1.5mm; Three directions :1H
10	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature :235±5℃ Immersing Time :2~3S
11	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
12	Safety Approvals		UL、CSA、TUV、ENEC
13	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa