Waterproof Micro Switch Push Button Auto Parts

Waterproof Micro Switch Push Button Auto Parts is offered by China manufacturers WEIPENG®. Our competitive pricing and popularity in the European and American markets make us an ideal long-term partner for your Household appliances ultra-small micro switch needs in China.

Model:FSK-14-1-5A-037

Send Inquiry

Product Description

WEIPENG® is a leading Tongda Waterproof Micro Switch Push Button Auto Parts manufacturers, suppliers and exporter.

Tongda Wire Electrical Tongda Waterproof Micro Switch Push Button Auto Parts Introduction

The waterproof micro switch is a sealed micro switch, with a micro contact gap and snap action mechanism. It is a kind of waterproof switch that uses prescribed travel and operating force to realize the circuit on and off. The housing of the waterproof micro switch is plastic material which is anti-flaming.

Tongda Wire Electrical Tongda Waterproof Micro Switch Push Button Auto Parts Parameter (Specification)

Switch Technical Characteristics:
ITEM	Technical Parameter		Value
1	Electrical Rating		5 (2)A 125/250VAC 10(3) 125V/250VAC
2	Operating Force		1.0~5.0N
3	Pretravel		0.6~1.5mm
4	Contact Resistance		≤50mΩ Initial value
5	Insulation Resistance		≥100MΩ (500VDC)
6	Dielectric Voltage	Between non-connected terminals	500V/0.5mA/60S
		Between terminals and the metal frame	1500V/0.5mA/60S
7	Electrical Life		≥10000 cycles
8	Mechanical Life		≥100000 cycles
9	Operating Temperature		-25~85℃
10	Operating Frequency		Electrical :15 cycles Mechanical :60 cycles
11	Vibration Proof		Vibration Frequency :10~55HZ; Amplitude :1.5mm; Three directions :1H
12	Solder Ability : More than 80% of immersed part shall be covered with solder		Soldering Temperature :235±5℃ Immersing Time : 2~3S
13	Solder Heat Resistance		Dip Soldering :260±5℃ 5±1S Manual Soldering :300±5℃ 2~3S
14	Safety Approvals		UL、CSA、CQC
15	Test Conditions		Ambient Temperature :20±5℃ Relative Humidity :65±5%RH Air Pressure :86~106KPa